Mechanical insulation
Insulation work offshore and afloat.
Our president came up through refineries, power plants, ships and offshore platforms before founding Ecostep. Marine and offshore insulation is a different trade from plant work, and it is one he learned on the water.
Where this experience comes from
Amer Abusafieh completed a union apprenticeship and earned his Journeyman Heat and Frost Insulator card in 1995. The years after that were spent inside refineries, power plants, pharmaceutical facilities, offshore platforms and ships, before he became a licensed California general contractor in 2003 and later founded Ecostep.
We say that plainly rather than claiming a standing marine division, because marine work is episodic and honest capability claims are worth more than impressive ones. If you have a marine or offshore scope, the right first conversation is a direct one about whether we are the right crew for it.
Why marine insulation is a different trade
The materials overlap with plant work. Almost nothing else does.
Everything is confined. Engine rooms, machinery spaces and pipe alleys are built to use every cubic foot for something. Access is through hatches and down ladders, there is rarely room to stage material near the work, and the clearances that make a plant insulation job routine do not exist.
Everything moves. A vessel works constantly: vibration from machinery underway, flexing of the structure in a seaway, and thermal cycling on top of both. Insulation detailing that is perfectly sound on a fixed plant pipe can loosen at the joints within a season of service.
Salt gets everywhere. Chloride-laden air is present continuously, which drives both the jacketing choice and the insulation chemistry. Where insulation contacts austenitic stainless, the leachable chloride limits behind ASTM C795 stop being a specification detail and start being the main event.
Weight is a real constraint. On a fixed plant nobody weighs the insulation. Offshore and afloat, somebody does, and the answer can rule out a material that would otherwise be the obvious choice.
Fire performance is governed differently. Marine fire protection operates under its own regulatory regime rather than the building codes that govern shoreside work, and the approvals that matter are vessel approvals. Any marine scope starts with confirming which regime applies and what approvals the specification demands.
Mobilization is most of the problem
On a plant job we can usually come back tomorrow. On a vessel, the window is the window, and after it the job sails.
Which means marine scopes are priced and planned around access and timing far more than around quantity. How material gets aboard, where it can be staged, how many people can physically work in the space at once, what happens if the schedule moves, and who else is working in the same compartment at the same time. Those questions decide the job. The insulation itself is the straightforward part.
Background
- Refineries
- Power plants
- Pharmaceutical
- Offshore platforms
- Ships
- Heat and Frost Insulator
- Journeyman card 1995
Questions we get asked
Before you ask us to quote a vessel.
Do you hold marine certifications?
Our California contractor license is a California contractor license. Marine work operates under a separate regulatory and approval regime, and the approvals that matter are usually attached to the materials and the vessel rather than to a state contractor classification.
So the honest answer is that the first thing we do on a marine enquiry is establish what the specification actually requires, and tell you straight if it is something we should not be bidding.
What do you need to price marine work?
The vessel or platform, the compartments, the specification, and above all the window. Quantity matters far less than access and timing.
Photographs of the spaces are worth more than a line list. Two minutes of video walking the compartment tells us more about the real cost than a page of takeoff.
Is the material different from shoreside work?
Often, and for reasons that are not obvious. Weight limits, approvals specific to the vessel regime, and the chloride question around stainless all narrow the field well before thermal performance is considered.
A product that is the correct and economical answer in a Bay Area mechanical room can be unusable on a vessel for any of those three reasons.
Related
Other scopes we self-perform.
Next step
Tell us the vessel and the window.
Marine scopes live or die on mobilization and access. Give us the layout and the dates and we will tell you honestly whether we are the right crew for it.